An independent reference about smart devices at home. We do not sell or install equipment and are not connected with the former site on this domain.

Guides

Practical guides

A smart device rarely breaks on its own. Far more often the disappointment comes because it was installed "just in case", given a confusing name and never checked to see how it behaves a week later. This section collects step-by-step advice for typical household tasks: from your first plug to a leak alert that wakes you when it matters, not for no reason.

One task, one device: that makes it easier to see what works and what just sits there unused.

— Editor's note

How to use this section: the advice is written in general terms and suits most smart devices. Buttons and menu items have different names in different makers' apps, so keep your device's manual at hand and follow it wherever it differs.

Guides

The tasks people usually start with when getting to know a smart home.

Choose your first task

Write down a few everyday annoyances that bother you most: a dark hallway, a forgotten iron, a cold nursery. Pick one and choose one device for it. A list of things to prepare is in the tools section.

Tools

Turn on lights with a motion sensor

Place the sensor so that it sees the walkway but does not face a window or radiator directly. In the scene, set a night-time brightness and how long until the light switches off by itself. If the light comes on for no reason, check the problems section.

Problems

Get devices talking to each other

Some devices connect directly to your home router, while others work through a separate hub. How these approaches differ and which one suits your home is covered in the comparisons.

Comparisons

Let your family into the smart home

Give family members their own access through an invitation in the app rather than sharing the password to your account. That way everyone controls what they need, and you can change permissions at any time. Details are in the security section.

Security

Prepare for selling or moving

Before leaving a device in the home or handing it to someone else, remove it from your account and reset it to factory settings as described in the manual. Terms you will meet in these menus are explained in the glossary.

Glossary

Catalogue of articles in English

This is where standalone Proshivki All articles written specifically for the English version of the guide will appear.

Topics we are working on

  • Setting up smart lighting in a rented home without rewiring or losing your deposit
  • Smart heating and thermostat routines that keep a draughty house comfortable
  • Doorbell cameras and porch privacy: being a good neighbour on a shared street
  • Keeping an eye on an older parent who lives alone, with their full agreement

Editorial rules

  • Articles in this catalogue are written separately for each language version and are not translations.
  • Some articles link to third-party websites, including gaming services; we do not control their content, prices or terms.
  • We do not publish advertising for manufacturers, shops or installers, rankings, prices or reviews.

How to set up a leak alert

  1. Find the risky spots

    Walk around your home and note the places where water can appear unnoticed: under the washing machine and dishwasher, under the sink, next to the water heater and the main pipes. A sensor is most useful where you rarely look.

  2. Place the sensor on the floor

    A leak sensor should sit at the lowest point, contacts facing down, as shown in the manual. Don't hide it under a mat or put it where it regularly gets splashed while you clean.

  3. Add the sensor to the app

    Connect the sensor following the manufacturer's instructions and give it a clear name that includes the location: "Leak, under the bath". Make sure the app shows it as working and displays the battery level.

  4. Turn on a loud alert

    Allow the app to send notifications and choose a noticeable sound for this sensor. If you have a speaker or a siren at home, add them to the scene: a sound in the house helps when your phone is in another room.

  5. Think about a shut-off valve

    If your home has a motorised water valve that is compatible with your system, the scene can shut off the water by itself. Leave fitting such a valve to the pipes to a plumber, and connect it to the scene strictly according to the instructions.

  6. Test the alert

    Lightly wet the sensor's contacts and make sure the notification reaches everyone who needs it and the sound can be heard. Then wipe the sensor dry and add a calendar reminder to repeat the test in a few months.

  • Tools

    What to gather before buying and setting up: a task list, a sketch of rooms and sockets, a guest network, a password store and device manuals.

  • Comparisons

    Direct Wi-Fi connection or a hub, cloud or local control, one ecosystem or devices from different makers.

  • Problems

    A device shows as offline, a scene does nothing, commands arrive late, a sensor triggers for no reason, batteries drain too fast.

  • Security

    Default passwords, cameras and recordings, microphones, guest access, overloaded plugs, selling and moving without strangers in your account.

  • Questions

    Answers about the guide, about choosing devices and getting them to work together, about cameras, microphones and access for the household.

Sources

  • Device manuals and specification sheets from manufacturers (in general terms)
  • Security recommendations for home network devices (in general terms)
  • Editorial materials of the Proshivki All guide

The texts in this guide are written in general terms and reflect the editors' view as of the date they were prepared. Smart devices from different makers are set up in their own ways, and buttons and menu items in apps get moved and renamed from time to time. If your device's manual or specification sheet tells you to do something differently from us, trust it.